Luminox Navy SEAL 3001 Heritage
Contents
- Luminox Navy SEAL 3001 Heritage
- The Luminox Navy SEAL 3001 Heritage is a best seller per their website, and I imagine that’s because of the classic look of this piece. It’s also got Heritage in the name, which seems to grab people’s attention these days, and it is a 30th anniversary model as the original 3001 was released all the way back in 1994, 30 years ago. I have worn a lot of Luminox watches in the past, though I haven’t really been wearing them the last 20 years or so, and this HAQ model, with that black dial and red accents, does make me reconsider them, as I do love the look and how lightweight it is at only 70 grams, due to that Carbonox case. It’s still 43mm, and it’s retailing for $745.
- In 2025 I would imagine most everybody is familar with Luminox as they have been around since 1989 and while a lot of Navy Seals say the Navy doesnt provide watches and that’s true, the orignal 3001 was developed in collaborition with acutal SEALS, and they support the Navy SEAL Foundation, and I am sure some SEALS where a Luminox, and there is still a partnership with them if you will. It’s also still a rugged, lightweight watch that will tell the time in the dark without a need for a light source, and continue to glow for up to 25 years, a reason Luminox became so popular in the 90s.
- I myself was enamored by Luminox, found at a now defunct jewelry store back in the late 90s or early 2000s, and I owned quite of few of the original models back then, and I put them through their paces for sure. I used to work as a chef and wore them in place of G-Shocks, my normal go-to watch, and they held up just as well. And I loved the tritium tubes, which I admit were very novel for me at the time, as I was probably about 18 years old when I got my first Luminox.
- I remember owning at least one version of the 3001 model, and I swear I owned a steel case version as well. And when I saw this model on the Luminox website after they asked if I would like to do a review, I knew this was the one I wanted them to send. This Luminox Navy SEAL 3001 Heritage ticked all the boxes for me, even before it arrived, as I loved the old school design, the upgraded rubber strap, the accents of red, and that it used a steel bezel over the plastic that was used on many of the models I have owned.
- I also find this Luminox Navy SEAL 3001 Heritage to be a very attractive watch. The case is made of Carbonox, a name for Luminox’s proprietary blend of polymer and, I guess, pieces or shaved bits of carbon, and while it is very lightweight, it doesn’t feel overly plastic to me like a swatch watch of the ’80s did. If you want forged carbon, they do offer that in other models, and they are labeled as Carbonox +.
- The case design is somewhat unique. I like the cutout and stepped design, and since it’s a proper dive watch, it does have crown guards and a screw down crown, no surprise there. The crown is black PVD steel coated, and for some reason, the whole time I thought it was Carbonox as well, and it makes sense to make it out of actual steel, but I don’t know why they coated it black, as keeping it regular steel would have matched the bezel.
- The bezel is 120 clicks, unidirectional, and its light, meaning it’s pretty easy to rotate, but I didn’t find it so light that it was moving constantly while on my wrist with a shirt cuff or jacket or going in and out of my pockets. The insert is Carbonox, and I am not sure if the painted white numbers are sealed or not, but I do like the dimension to the bezel insert, and of course that massive lume pip, which I believe is a relatively new design for this model. It’s cool and not comically large, but I’m not sure if the glass that covers it is mineral or sapphire, and I would hope for $745 that it’s sapphire like the crystal above the dial.
- The dial of the Luminox Navy SEAL 3001 Heritage is pretty standard Luminox, and I don’t see a massive difference from the standard model they offer of the 3001, which, at the time of publishing, is currently sold out. There are a few differences, most notably the second hand on this Heritage model is an arrow tip and colored red to match the red 30 on the bezel.
- It’s also got one less line of dial text, and the standard model seems to have larger tritium tubes, but more on that in a bit. It’s also a rather small dial, considering the size of the case, as I measured it as 27.4mm, and part of that is taken up by the chapter ring with the tritium tubes. It’s still easily readable with white hands and doesn’t exactly feel tiny, but I do wish the dial were larger. One area that really did aggravate me, though, the second hand does not hit the markers dead on, for at least half the dial on my example. This is not uncommon for a lot of quartz watches, but with a HAQ movement, I expected it to be pretty much perfect.
- If you have owned a watch with tritium, you know it needs no light source for it to glow, and it generally will glow bright for 10 years and then start to fade, with 25 years being its full lifespan. This Luminox Navy SEAL 3001 Heritage is no different, and it glows in the pitch black darkness just fine, but the standard version definitely had bigger rectangles over the squares used on the heritage edition.
- That said, even with what I perceive as a smaller dial opening, I do love how this looks and wears on my 7 1/2 inch or 19.05cm wrist. I just dig the look, and it’s insanely comfortable being so lightweight and with a relatively flat case back, and this NBR rubber, which is not as soft and pliable as the more modern FKM, does feel good, and it fits my wrist with a few holes left over.
- It’s got odd sizing, both in width and length, kinda par for the course with Luminox. The lugs are 21mm, so it’s a 21mm strap obviously, so if you dont want this rubber, youll have to go custom or buy a different type of strap from Luminox, and it’s 125 x 80mm in length, again, odd, but it does fit me perfectly, and I have always liked the grooved or ribbed design.
- I absolutely have a fondness for this Luminox Navy SEAL 3001 Heritage as it reminds me of my younger days, going to Service Merchandise and looking at the latest models, and sharing my passion for watches with my father, or should I say he shared it with me, which is why I am still a watch nut all these years later. This design works for me, and I love how it looks and wears overall.
- I just wish for a slightly larger dial opening, though that seemed to bother me less the more I wore it. At $745, I do find it pricey, especially considering it’s not a massively different watch than the standard version, but I do like the addition of the steel bezel and the red accents. I honestly can’t remember what I was paying for Luminox watches 25 years ago, but I know they were a lot less, and even though everything is relative, I do think that the second hand should be calibrated better if you are going to charge these prices. Looks and wearability, though, I think it’s killer.
- Luminox
The Luminox Navy SEAL 3001 Heritage is a best seller per their website, and I imagine that’s because of the classic look of this piece. It’s also got Heritage in the name, which seems to grab people’s attention these days, and it is a 30th anniversary model as the original 3001 was released all the way back in 1994, 30 years ago. I have worn a lot of Luminox watches in the past, though I haven’t really been wearing them the last 20 years or so, and this HAQ model, with that black dial and red accents, does make me reconsider them, as I do love the look and how lightweight it is at only 70 grams, due to that Carbonox case. It’s still 43mm, and it’s retailing for $745.
Specifications 43mm Carbonox Case 27.4m Dial opening 45mm lug to lug 13.3mm thick 21mm lug width 70 Grams Sapphire Crystal 200m Water Resistant NBR Rubber Strap T25 Tritium Tubes ETA F06.412 Swiss Quartz MSRP $745 https://luminox.com/products/navy-seal-original-3001-heritage-dive-watch-43-mm
In 2025 I would imagine most everybody is familar with Luminox as they have been around since 1989 and while a lot of Navy Seals say the Navy doesnt provide watches and that’s true, the orignal 3001 was developed in collaborition with acutal SEALS, and they support the Navy SEAL Foundation, and I am sure some SEALS where a Luminox, and there is still a partnership with them if you will. It’s also still a rugged, lightweight watch that will tell the time in the dark without a need for a light source, and continue to glow for up to 25 years, a reason Luminox became so popular in the 90s.
I myself was enamored by Luminox, found at a now defunct jewelry store back in the late 90s or early 2000s, and I owned quite of few of the original models back then, and I put them through their paces for sure. I used to work as a chef and wore them in place of G-Shocks, my normal go-to watch, and they held up just as well. And I loved the tritium tubes, which I admit were very novel for me at the time, as I was probably about 18 years old when I got my first Luminox.
I remember owning at least one version of the 3001 model, and I swear I owned a steel case version as well. And when I saw this model on the Luminox website after they asked if I would like to do a review, I knew this was the one I wanted them to send. This Luminox Navy SEAL 3001 Heritage ticked all the boxes for me, even before it arrived, as I loved the old school design, the upgraded rubber strap, the accents of red, and that it used a steel bezel over the plastic that was used on many of the models I have owned.
I also find this Luminox Navy SEAL 3001 Heritage to be a very attractive watch. The case is made of Carbonox, a name for Luminox’s proprietary blend of polymer and, I guess, pieces or shaved bits of carbon, and while it is very lightweight, it doesn’t feel overly plastic to me like a swatch watch of the ’80s did. If you want forged carbon, they do offer that in other models, and they are labeled as Carbonox +.
The case design is somewhat unique. I like the cutout and stepped design, and since it’s a proper dive watch, it does have crown guards and a screw down crown, no surprise there. The crown is black PVD steel coated, and for some reason, the whole time I thought it was Carbonox as well, and it makes sense to make it out of actual steel, but I don’t know why they coated it black, as keeping it regular steel would have matched the bezel.
The bezel is 120 clicks, unidirectional, and its light, meaning it’s pretty easy to rotate, but I didn’t find it so light that it was moving constantly while on my wrist with a shirt cuff or jacket or going in and out of my pockets. The insert is Carbonox, and I am not sure if the painted white numbers are sealed or not, but I do like the dimension to the bezel insert, and of course that massive lume pip, which I believe is a relatively new design for this model. It’s cool and not comically large, but I’m not sure if the glass that covers it is mineral or sapphire, and I would hope for $745 that it’s sapphire like the crystal above the dial.
The dial of the Luminox Navy SEAL 3001 Heritage is pretty standard Luminox, and I don’t see a massive difference from the standard model they offer of the 3001, which, at the time of publishing, is currently sold out. There are a few differences, most notably the second hand on this Heritage model is an arrow tip and colored red to match the red 30 on the bezel.
It’s also got one less line of dial text, and the standard model seems to have larger tritium tubes, but more on that in a bit. It’s also a rather small dial, considering the size of the case, as I measured it as 27.4mm, and part of that is taken up by the chapter ring with the tritium tubes. It’s still easily readable with white hands and doesn’t exactly feel tiny, but I do wish the dial were larger. One area that really did aggravate me, though, the second hand does not hit the markers dead on, for at least half the dial on my example. This is not uncommon for a lot of quartz watches, but with a HAQ movement, I expected it to be pretty much perfect.
If you have owned a watch with tritium, you know it needs no light source for it to glow, and it generally will glow bright for 10 years and then start to fade, with 25 years being its full lifespan. This Luminox Navy SEAL 3001 Heritage is no different, and it glows in the pitch black darkness just fine, but the standard version definitely had bigger rectangles over the squares used on the heritage edition.
That said, even with what I perceive as a smaller dial opening, I do love how this looks and wears on my 7 1/2 inch or 19.05cm wrist. I just dig the look, and it’s insanely comfortable being so lightweight and with a relatively flat case back, and this NBR rubber, which is not as soft and pliable as the more modern FKM, does feel good, and it fits my wrist with a few holes left over.
It’s got odd sizing, both in width and length, kinda par for the course with Luminox. The lugs are 21mm, so it’s a 21mm strap obviously, so if you dont want this rubber, youll have to go custom or buy a different type of strap from Luminox, and it’s 125 x 80mm in length, again, odd, but it does fit me perfectly, and I have always liked the grooved or ribbed design.
I absolutely have a fondness for this Luminox Navy SEAL 3001 Heritage as it reminds me of my younger days, going to Service Merchandise and looking at the latest models, and sharing my passion for watches with my father, or should I say he shared it with me, which is why I am still a watch nut all these years later. This design works for me, and I love how it looks and wears overall.
I just wish for a slightly larger dial opening, though that seemed to bother me less the more I wore it. At $745, I do find it pricey, especially considering it’s not a massively different watch than the standard version, but I do like the addition of the steel bezel and the red accents. I honestly can’t remember what I was paying for Luminox watches 25 years ago, but I know they were a lot less, and even though everything is relative, I do think that the second hand should be calibrated better if you are going to charge these prices. Looks and wearability, though, I think it’s killer.
Luminox
